DIY: Woven Chain Bracelet

From our Pattern inspiration Woven on our last post, We want to share a DIY Woven bracelet that you girls can enjoy doing this weekend. We love this post from Honestywtf.com  inspired by Aurèlie Bidermann‘s Do Brazil bracelets. Cmon' girls, let's have Fun ♥

You'll need

Curb Link Bracelet
Embroidery Thread
2 Bobby Pins
A pair of Scissors

How to do it:

Cut 2 sets of 15 strands of Embroidery thread, with each strand measuring 4 times the length of the bracelet. Knot all the threads on the top, leaving 2 inches of slack. Sandwich each set between a bobby pin, this will help you easily weave the threads through the links of the bracelet. Lay the threads to the left of the bracelet. Pull the first color (coral) from under the first link and over the top of the left side.

Lay the second color (blue) over the first color (coral). Pull the second color (blue) from under the same link and over the top again. Repeat the steps, moving onto the new link: put the first color (coral) on the top of the second color (blue) and pull it out from under the 2nd link and over the top left. Lay the second color (blue) on top of the 1st color (coral) and pull it out from under the 2nd link and over the top left again. Because the links of this bracelet are large, you need to weave the threads twice in each link. But If the bracelet is smaller, once is enough :)

Repeat the steps until you reach the end of the bracelet. Finish it with a knot and trim the ends.

And Here's the Finished Product. 

Enjoy Your weekend Girls! :)

♥DIY: Woven Bracelet ♥

Shop online

Tiny Ichigo (kid's shoes) is also available at Club Princess stores at Bonifacio High Street and Mall of Asia

Follow us: 
ichigoshoes

    

Follow @ichigoshoes

DIY: Glitzy Iphone cases

Hi Girl's! 

Let's Have Fun!

We know how cute phone cases are, so we decided to to share a DO IT YOURSELF iphone case, it's a fun activity to do over the weekend. We saw this DIY glitzy iphone cases from Designsponge.com 

So what are you waiting for? let's make those iphone cases shiny glimmery ♥

You'll Need:

Glitters
Tinsels or Streamers
Modge Podge
Brushes
Paint
Scissors or Hole Punch
Clear iphone cases

Steps:

1. Assemble your glitter components. Use about a tablespoon-sized amount of glitter, tinsel and hand-cut streamers. To make the streamer parallelograms, take a few strands and cut them long ways and then bunched them in a group and cut at an angle.

2. Working on one phone at a time (the glue dries really quickly), coat the inside of the case with a thin layer of Mod Podge. Distribute your glittery elements the way you’d like, dropping them from above or gently placing them with the tip of your finger. Try not to smudge or move the Mod Podge too much or you’ll leave a smear.

*If you want to just use small glitter, you can mix it into a small batch of Mod Podge and apply it directly in one step.

3. When your Mod Podge is totally dry, remove any excess glitter elements that didn’t full adhere, and either apply another coat and more glitter or move on to your paint.

*You can use a small Q-tip to remove excess glitter, paint or Mod Podge.

4. Apply a thin layer of paint (black was my favorite, because the glitter really stood out against it) and wait for it to fully dry. Do two thin coats on each phone.

5. Once the paint has fully dried (dry it overnight), apply a final thin coat of Mod Podge to seal the paint. Attach to your phone, and you’re done!

And the Finished Product! :)

Continue with the other cases..

Hope You enjoyed! 

Happy Weekend!

♥DIY: iphone cases♥

Shop online

Tiny Ichigo (kid's shoes) is also available at Club Princess stores at Bonifacio High Street and Mall of Asia

Follow us: 
ichigoshoes

    

Follow @ichigoshoes