DIY: Cut-out Denim Shirt

Let's Have Fun Girls!

Here's another Do It Yourself Activity! We want to share this article we saw online by A Pair and A Spare from Vogue. Try this out Ichigo Girls, A Cut-out Denim Shirt with a twist. 

Photo's from:  A Pair and A Spare.

You need:

Denim Shirt (you can use an old denim shirt)

Scissors

Ruler

Pen

Needle and Thread

Sewing Pins

How to:

1.    Turn your shirt inside out and use a pen to mark a horizontal line where you want the bottom of your cut out to sit.

2.    Using your scissors, start cutting out the fabric, following the seams of the shoulders, button strip and neckline.

3.    Once you have cut both sides out, use some sewing pins to roll the edges of the bottom of the cut out over and secure.

4.    Using a needle and thread, sew the edge down, doing an invisible stitch on the front and longer stitches on the back.

5.    Once complete, iron the edge down.

Blog by Geneva Vanderzeil from A Pair and A Spare.

♥Cut-out Denim Shirt♥

♥

Shop online

Tiny Ichigo (kid's shoes) is also available at Club Princess stores at Bonifacio High Street and Mall of Asia

Follow us: 

ichigoshoes

   

Like us:

Follow @ichigoshoes

DIY: Camera Chain

Feel like snapping your photos wearing a jewelry chain or a shoulder bag? Here's an amazing DIY We saw from  a pair & a spare blogspot 

You'll need:

- 2 meters of strong but lightweight bronze chain (you don't want to double the weight of your camera!)

- 2 sliplock buckles (you can use your old camera strap)

- 50cm of strong nylon webbing

- E6000 glue or Mighty bond

- Scissors

How to:
1. Cut the nylon webbing in half.

2. Slide one end of the nylon webbing through the camera strap holder on the camera

3. On the outer lower half of the nylon webbing, thread one of the sliplock buckles

4. Fold the chain in half and slide the two loose ends onto the nylon webbing.

5. Double the nylon webbing over and pass back through the sliplock buckle.

6. Thread the other loose end through the sliplock buckle and reinforce both ends with E6000 glue. 

7. Press down to dry and feel free to reinforce the glue with some hand stitches through the webbing. Finally, repeat this process for the other end of the strap.

If you are concerned about the chain breaking or any other mishaps, add another strap of nylon webbing for reinforcement, attached directly onto the camera's strap holders, and weave though the chain for a decorative look. Worried that the chain might pinch your shoulder? You can also wrap and glue some leather around the shoulder section. 

♥ Camera Chain ♥

Shop online

Tiny Ichigo (kid's shoes) is also available at Club Princess stores at Bonifacio High Street and Mall of Asia

Follow us: 

ichigoshoes

   

Like us:

Follow @ichigoshoes